1 / 2
K1C Side Filament Guide for DXC Extruder (after stock run-out sensor removal)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a guide to fit the PTFE tube from the back of the printer to better feed the filament
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 1
- Wyświetlenia
- 268
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Guide to run the PTFE from the back of the printer to the side, to feed the filament through after removing my stock run-out sensor and the stock extruder, replaced by the DXC extruder that has the run-out sensor integrated.