Prusa Mini LED Strip Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a small solution for mounting and powering an LED strip light. So modified one to fit my Mini.
- Ocena
- 4,6 / 5
- Polubienia
- 80
- Pobrania
- 468
- Wydruki
- 2
- Wyświetlenia
- 4635
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted a small solution for mounting and powering an LED strip light. So modified one to fit my Mini.
Other Parts Needed
- USB LED Lights Strip
- M5 x 10mm bolt
- M5 T-Nut for 3030 or print the one listed in resources below
Files sources used are referenced below.
Prusa Mini Lamp Holder by Mr. Baham -
https://www.prusaprinters.org/prints/15259-prusa-mini-lamp-holder
Ender 3 LED stripby npb518 -
https://www.thingiverse.com/thing:3105878
3030 Thread M5 Nut by BensHacks- https://www.thingiverse.com/thing:3998406
Options to power the LED strip
- Use the USB cable or if you are using a Raspberry Pi you can use the GPIO pins.
Print instructions
I printed this in 0.20 layer height, with supports and on the mini with the provided gcode.
Or you can use the 3mf to customize the print to your liking.