Planter Starter Cups - Faster Print Versions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of mfischer79's Planter Starter Cups with thinner walls for faster printing and less filament usage.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Basic Idea
I really like mfischer79's Planter Starter Cups. But in order to save material and speed up printing time, I wanted a thinner-walled version. This is it. It comes in two versions:
Version 1: wall thickness of 1.2mm
Version 2: wall thickness of 0.8mm
Both versions are compatible with mfischer79's tray. So you don't need to print a different one for them. (But you can, see below.)
But how much can you actually save?
Just look at the graph below. I got the time from my slicer and the weight from actually weighing my two versions + the original.
The actual numbers are also listed in the table below:
Time | Weight | |
|---|---|---|
Version 1 | -20% | -27% |
Version 2 | -32% | -47% |
Please be advised: those values are valid for my printer with my settings. Your mileage may vary, as they say.
So which version should you print?
Well... depends on your needs...
If you want a really sturdy print - use the original and none of my models. It really is the strongest of the three (as is to be expected).
If you're okay with a little less strength, but want to print a lot of them - maybe use my Version 1. It cuts printing time by 20% and saves you about 1/4 of filament. This is the version I personally use.
If you don't need a lot of strength, but want to be fast and save material - you could use my Version 2. It cuts printing time by about 1/3 and saves almost half of the filament used. But it is quite a bit flimsy.
If you're unsure - you could print one of each and decide according to your requirements with the physical models in hand.
Update 04/26: Faster-printing tray
I added a re-engineered version of the tray that also has thinner walls and allows for faster printing, saving about 40% of both material and time. (At least under my printer settings.)