HSW Panel Joining Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A jig that I use to support HSW panels so that I can create larger panels for later installation on walls.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I like to join the HSW panels that I can print on my bed (220mm) into larger panels (what I call "6 packs" which are 3 columns x 2 rows of panels that are usually 8x8 HSW panels. This is so I don't have so many connections to join them and to be able to reach across the gap between studs (16" typically which is about 406.4 mm).
So I made a jig that I use to support HSW panels so that I can create larger panels for later installation on walls.
It just helps hold everything nicely in place while the epoxy cures.
I printed with nice shiny PETG which makes it easy to remove any mess if I make some with the epoxy.