Alloy wheel for kids pedal go kart or sack barrow
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I hate taking small tyres off alloys to change the inner tube so I wanted a 2 part alloy to make this easier.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
I have a kettler pedal go kart which has 4 alloy wheels made of a very hard plastic. The tyres perished to the point there were several cracks but the tread and general integrity was good to keep using them with inner tubes.
So I have chosen to add inner tubes but it is such a drag having to pry the tyre off of and then squeeze the inner tube inside and push the tyre back over the plastic alloy to form a repair for the kids.
So I wanted a 2 part alloy which I can simply bolt together. Does not need to be air tight and just holds the tyre in place while the inner tube is fitted and then pumped up.
I have created the original size (I hope) with a 27mm bearing hole and created a option for the readily accessible 22mm bearings. (Though I am not sure what you would use this size for).
The alloy is meant for a 10" tyre.
I am currently having a play with a much smaller version as it could be used for RC cars with tiny innertubes.
Please customise these as you would like, Id love to see someone's full set one day for their kids.