Wall Mount for Chromecast-Audio
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this bracket because the Chromecast-Audio needed a fixed place near the stereo. The hole on the top has a…
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 473
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this bracket because the Chromecast-Audio needed a fixed place near the stereo.
The hole on the top has a 10mm diameter, so a standard audio plug should fit in. The plug for the power supply isn't covered by the bracket. One arm of the bracket covers the half of the button of the Chromecast but does not press it and it is still reachable, in case you need to push it.
The difference between the two files is that the "V2" version has slightly longer clamps at end of the arms. The Chromecast fits good in the first version but I wanted it to hold it a little bit tighter.
Update (17-01-2020): I added a version with a hole for a screw.
Print Settings
Printer:
Renkforce RF100
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
15%
Filament:
Patona PLA
Black