1 / 3
Voron v0 Kirigami brace with 40mm fan — zdjęcie 1
1 / 3

Voron v0 Kirigami brace with 40mm fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A stiffening brace for the Kirigami bed without any mounting options except for a 40mm fan.

Ocena
5 / 5
Polubienia
8
Pobrania
19
Wydruki
1
Wyświetlenia
141
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Description

I liked the idea of a Kirigami bed brace with a fan mount. However, I have only a 40mm fan left and I also have the Formbot Kit which has no PCB or Wago mounts. So I designed my own.

I used the model by driftrotor as inspiration.

Parts and BOM

You'll need 4 Voron-style heat inserts. 4 Screws are needed for mounting the brace (forgot which length, but probably 6mm or 8mm). For mounting  onto the Carriages 2 screws can be reused but 2 longer screws are needed (forgot which length).

You don't have to fasten the fan. I used narrow heat inserts and 4 m3 screws. But m3 screws and nuts are also possible.

Printing and post processing

Please orient the part appropriately. You may have to sand the mating surfaces which hold onto the carriages.

Tagi