Thumbtack adapter compatiable with Pop Badges
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set of inserts designed to be used on Legoland Pop badges to use them on a bulletin board.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Set of inserts designed to be used on Legoland Pop badges to use them on a bulletin board without permanent modifications.
24mm model fit most of my pop badges, but I've created a couple variations as required to fit the badges I have.
Print inserts with 3 walls and 0.16mm layer height, no supports.
Designed to fit these flat thumbtacks, which are a very snug fit on my machine. The assembly base should be printed with 5 walls and 20% infil as it is intended to hold the backer while using a hammer to secure the tack.
https://a.co/d/0gUUOrLO