Prusa Pro HT90 Cable Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement cable bracket for the HT90.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 54
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
The original cable bracket broke recently, I made as close of a replica as I could. It uses the original screw and elastic string, the string is a little tricky to untie but can be done. It's easier to install the string before putting the screw in so you don't have to worry about slack. The STEP file and onshape link are available if you need to make any changes.
Recommended Settings:
High temp material (ABS/ASA/Etc.)
VERY high temp material if printing with 90 °C chamber (ASA confirmed to not withstand heat)
5 walls
5 top and bottom layers
20% gyroid infill
Disable single perimeter on bottom and top surface
Organic support from buildplate only on necessary overhangs (use support painting smart fill)
0.15 mm top Z support distance (0.2 mm may lead to poor tolerance with the screw area)