TheraBand Belt Buckle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this little buckle to make it easier to work with Therabands. You can adjust the length of your loops with…
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 251
- Wydruki
- 3
- Wyświetlenia
- 1330
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this little buckle to make it easier to work with Therabands. You can adjust the length of your loops with it without using any knots. Just fold the Thera band a couple of times so that it fits into the buckle holes and wind it through like with a backpack belt.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Notes:
Just make sure that the printed part is stable enough to carry the load of a tensed Theraband! This depends on the material you use and the wall thickness of your part. I printed it with 1.6mm walls and it worked well so far.