1 / 2
Extended Length Links (+20mm and +40mm) for Articulating Raspberry Pi Camera Mount — zdjęcie 1
1 / 2

Extended Length Links (+20mm and +40mm) for Articulating Raspberry Pi Camera Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Longer links (+20mm and +40mm). Provides extra reach with fewer joints.

Ocena
5 / 5
Polubienia
8
Pobrania
87
Wydruki
1
Wyświetlenia
182
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Sometimes the standard modular links just aren't long enough. These extended versions allow you to bridge larger gaps or reach over printer frames with ease.

By using these longer center sections, you can significantly simplify your camera mount assembly while increasing the overall rigidity of the arm - fewer joints mean fewer points of failure and less adjustment needed.

Available Versions:
  • +20mm Extension: The perfect middle-ground for reaching around corners.

  • +40mm Extension: Maximum reach for overhead or wide-angle shots.

  • Includes all standard connection types (MM, FF, FM).

Differences of the remix
Other models in collection:

Tagi