PICKit 3.5/3 + PICKit 5/4 Rugged Case Inserts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PICKit 5 insert with two large boxes + PICKit 3.5 insert with ZIF socket adapter for Rugged Multipart Case.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Some time ago I saw the excellent PICKIT 4/5 rugged case by //sgc , and wanted to print one for myself, but then I realized that I also have an older PICKit 3.5 clone with a ZIF socket adapter, that I still use from time to time. Also there was no place for the ribbon cables used for ICSP.
So I designed a couple of new inserts to fit everything in one double height rugged box by Aikano9. The inserts can also be used together with the original model by PjotrStrog.
The inserts experience practically no mechanical stress compared to the external shell, so it's pretty much OK to print using PLA.