Snap-Fit Cable Management Clips for Articulating Raspberry Pi Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy-to-use snap-on cable clips that utilize the existing zip-tie slots on articulating camera links.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tired of using permanent zip ties to manage your camera cables? These snap-fit clips are a completely original solution designed to tidy up your articulating camera arm while keeping it easy to adjust or disassemble.
They are designed to click directly into the rectangular zip-tie openings found on the standard and normalized links.
Key Features:
Tool-less Installation: Just snap them in. No zip ties to cut, no waste, and no scratching your fingers on sharp plastic ends.
Reusable: Easily pop them off if you need to reroute your cable or change your arm configuration.
Secure Hold: Perfect for the standard thin cables found on Raspberry Pi cameras and webcams.
Multiple Variants: I’ve included several styles (open loops and closed hooks) so you can choose the one that works best for your cable thickness.
Print Settings:
Material: PETG is highly recommended for these because it is more flexible and less likely to snap during installation than PLA.
Orientation: Print them flat on the bed for maximum clip strength.
Layer Height: 0.20mm works perfectly.
Supports: None required!