Samsung S23 Ultra Lens Hood
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These friction-fit lens hoods help keep stray light out of your lens, increasing contrast and preventing blown out pics.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 340
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
Introduction
As awesome as the 10x telephoto lens is on the S23 Ultra, I noticed that in non-ideal lighting conditions (or if your lens is damaged or smudged), captured images could sometimes look blown out with poor contrast. I made a few different-sized lens hoods and came up with this, finding a balance between blocking stray light from outside the subject area while still letting the auto-stabilization of the lenses work properly.
This lens hood works simultaneously for both the 3x and 10x telephoto lenses on the S23 Ultra, but will block the normal and periscope lenses fields of view. Since this lens hood can be removed and installed quite quickly, it normally shouldn't be too much of a hassle to remove if required.
You can expect this attachment to not usually make much of a noticeable difference in your images, but in situations where you notice glare, image quality can start to become significantly better. In the example image, the lighting environment and camera settings are identical, with the only difference being the lens hood being removed for the first picture and installed for the second picture. The glare is from a window being ~3 feet above the subject area.
The lens hood attachment(s) are small enough that you should be able to keep one in your pocket without too much discomfort.
This lens hood attachment may fit on the S22 Ultra and S24 Ultra phones, but may not have the optimal opening size for these cameras.
Notable Printing Considerations
Make sure to print this part out of a matte-black coloured filament. Otherwise, you will not be removing as much glare.
I printed mine out of PA6 CF for durability, but you should be able to make theses lens hoods out of just about anything. Since PA6 CF tends to have some shrinkage, the model may be a loose fit with more standard materials, so I have also included a slightly tighter-fitting model with smaller tolerances.
If you are sufficiently happy with how this design has worked out for you, please consider sending a donation my way if you are able: https://buy.stripe.com/bIY4i488N84rcCY3cc