Water Bottle Holder - Solid, Tough, for 2x lumber
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Water Bottle Holder - designed to slide over a standard 2×4 or any other “2-by” lumber
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Water Bottle Holder for 2x4 Lumber
I enjoy creating practical items for around the house. This model is a water bottle holder designed to slide over a standard 2×4 or any other “2-by” lumber, making it great for workbenches, bunk beds, lofts, railings, or shelves.
The holder has two sections to help stabilize different bottle sizes. The lower opening fits smaller bottles, while the upper opening supports larger bottles.
Probably should print in PETG
Dimensions & Fit
Mounting slot (fits over lumber): 40 mm wide (slightly larger than 1½ inches)
Upper bottle opening: 89.5 mm diameter (~3½ inches)
Lower bottle opening: 79.5 mm diameter (~3⅛ inches)
Bottle Compatibility
Fits most 19–20 oz bottles in the lower section
Larger bottles may fit in the top opening depending on shape
32 oz Nalgene bottles do NOT fit
If you print one, I’d love to hear how it works for you or if there are changes that can be made.
Questions, suggestions, and constructive critiques are always welcome!
Thanks for checking it out!