1 / 1
Remix - Extra Strengthened Prusa CORE One L (C1L) Nozzle Wiper
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extra strengthened version. The "feet" on the bottom are beefed up so you can remove supports without breaking them.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 166
- Wydruki
- 6
- Wyświetlenia
- 852
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 6) (Komentarze: 6)Remiksy (1)Kolekcje (78)Powiązane
I was having trouble removing the supports off the bottom of the previous two models (original and then the strengthened) without breaking the “feet” off the bottom. Beefed ‘em up, and now they’re solid.
Use either m3 x 10 or m3 x 12 screw (I used m3 x 12 so that I could use a self-locking nut)
This is a remix of the "Strengthened" version, as it beefs up the arm, which broke for me on the original one as well.