Brick by Brick (B&M) Technic Compatible Replacement Parts — Non-LEGO Originals
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lost a piece from a B&M Brick by Brick Technic-compatible set? -> These are for you !
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Lost a piece from a B&M Brick by Brick Technic-compatible set?
-> These are for you !
B&M's Brick by Brick range includes some parts that don't exist anywhere in the LEGO catalog — no BrickLink entry, no BrickOwl listing, nothing on Rebrickable. This collection covers some of those proprietary parts I was missing in my son's set, modelled from scratch based on original pieces CAD adjusted to match the Brick By Brick pieces
.
Parts included:
Technic Liftarm Thick 1 x 5 with Alternating Holes — similar to LEGO 2391 but a non-LEGO size
Technic Liftarm Thick 1 x 3 with Perpendicular Half Pins — B&M original, no LEGO equivalent
Technic Pin with Perpendicular Axle Hole — B&M original, no LEGO equivalent
Both STEP and STL provided. STEP recommended if you want to adjust tolerances in Fusion 360 or FreeCAD before printing.
Printed successfully in ABS on a Qidi Q2 with active chamber. PLA should also work fine for light-duty use.