MMX200 Headset connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement part for the beyerdynamics MMX200 headset that connects the headband to the metal mount on the ear cup.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
Work in progress!
Since the original kept breaking and glue wasn't a solution, I tried to 3D print a replacement part.
It works, but it still needs an M3 screw with a nut for greater durability; an older version without one broke after a month of use. I’m still using the lower screws that were used in the original part, but the two below the headband were too small to install.
I printed my version using a 0.4 mm nozzle with ABS, and it fits very tightly - you have to use some force to put it together. All 4 parts are included in the file. You’ll need to split them into separate parts to print them in the correct orientation, and no support material is required.
Currently, there is no cable guide, which I may or may not add in the future.
I may also add a few more pictures/instructions for assembly at a later date.