RAM Promaster Window Switch Cover for Cat & Dog Protection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Switch cover for RAM Promaster driver side window / locks / mirror adjustment. Keep your pets from locking you out :-)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 443
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I've made a couple of Promaster Van parts. Several people mentioned they were looking for a switch cover to keep their pets from locking the doors or opening the windows. I don't have pets anymore, but took a swag at it.
Installation:
I installed double sided tape all over the bottom of the base unit. I used an exacto knife to trim the tape
clean the switch area with Isopropyl Alcohol
carefully line up the base plate and apply. It takes several hours to set up to full strength
push the dome into the cover piece. It should be a tight fit. If it isn't on your printer use super glue
The cover snaps onto the base. There are tabs on either side of the cover to make it easy to remove
Things I used:
Scotch brand 0.39in x 36ft 300LSE Double Sided Tape ( https://amzn.to/4lt3d9x )
Black PETG ( https://amzn.to/4sCqAzU )
Superglue ( https://amzn.to/4ryFPZM )
FTC Disclaimer: We may earn commissions for purchases made through the links above. As Amazon Associates we earn from qualifying purchases