Lock for Bunk bed ladder cover/climbing guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lock to prevent children from removing a ladder cover
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
To prevent my children from removing the bunk bed ladder cover I designed a simple locking mechanism. It is screwed into the back of the cover below one of the steps. Through gravity it will lock itself. You have to reach around to turn it while removing the cover. My 1.5 and 4 year old children did not (yet) figure out a way to remove it on their own.
Prints without support. I used PETG but PLA will probably work as well. Use more 4 or more perimeters (my kids managed to break it with the default 2 perimeters and PETG)
Screw it in using a 3.5 x 20-30mm wood screw. Do not tighten the screw to much. It need to be able to rotate freely.