PS5 Controller Cradle for "Plasticlamp"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PS5 Controller Cradle for "Plasticlamp" system, to enable mounting the controller to a chair, desk or other.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- GNU General Public License v3.0
Mount your PS5 controller to your sim racing chair, desk, or anywhere else using this controller cradle and the Plasticlamp system.
Print with the flat mounting surface facing down. I recommend adding support to the the hexagonal slot. Otherwise fairly standard print settings should be fine. I had trouble getting a good quality print on the angles in PETG so went with PLA in the end, but either should work.
For the Plasiclamp system, I think ideal screw sizes are:
Phone clamp: M3 x 12mm or longer
Socket tightener: M3 x 18mm or longer
Pipe clamp: M3 x 25mm
Ball attachment: M3 x 15mm or longer
You could definitely buy a pack of longer screws and shorten them where needed.
Credit also to this PS5 Controller Scan by Kabliga. Was very useful in getting this design right.