Ozito Line Trimmer Spool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Line Trimmer Spool for Ozito Line Trimmers.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 252
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Replacement Line Trimmer Spool for Ozito Line Trimmers. I designed it be a replacement for the one that comes with the PXCLTS-0182 model (2x18V 300mm). I also modified it to use 2.4mm trimmer line as I found the thin line that came with the trimmer was too weak.
The chamfered edges help bump feed compared to original with only a light tap. I also made the end thick so it should wear longer (ensure top layers are so it prints solid).
I imagine this would work with other Ozito models but haven't tested. Also would work on equivalent Einhell.
Printed in PETG @0.2mm layer height. Supports on. 20 top layers, 6 walls, 6 bottom layers, 50% infill.