W3230 Chamber Heater For Centauri Carbon

I wanted a stand alone chamber heater to add to my printers that did not require drilling holes for bolts or screws. I used a cheap amazon 120v 200 watt heater, 10 x 2 magnets, a W3230 120v temp controller, a lighted 120v rocker switch and a power cord. I ran the heater power cord out of the slot by the filament sensor and ran the temp probe in at the same spot on the Centauri Carbon. I super glued the magnets on and they stay put just fine. You connect the 120v heater plug in to the temp controller and plug the temp controller in to the wall outlet.

1. https://www.amazon.com/dp/B07573FKSG?th=1

2. https://www.amazon.com/dp/B0CXHLF5F9?th=1

3. https://www.amazon.com/dp/B0D49KRD45?ref=ppx_yo2ov_dt_b_fed_asin_title

4. https://www.amazon.com/Vockjour-Appliance-Replacement-Pigtail-Listed/dp/B0FFB3JXCY/ref=sr_1_6?crid=975ZJQGPXS57&dib=eyJ2IjoiMSJ9.EAtNwYuG8jBR8htLenDTvLUBYavE3CvRdP9nipt2hO9Cpycch9NBamW7t9gClzB7-TjPsx7IlY76enplUK00TCFy7KJR8PZnRiivae-wDY76YvLu-k-Q38Mj2RMxPagmFAYu31W2YcWcpqCiTAESxkKtmjp0JuR-APwEMSsEHLWxCY0Z11hZddzuDrv5hhYNjsTMMFbvqOEjfIRMM2PHSzppCEvQ668MmYPPJTxk2F4.wiwdrAQ1_-q-2Q5UeVm7ToFczNT408y4FMJ6wvbO2xo&dib_tag=se&keywords=6%27%2Bpower%2Bcord&qid=1773448180&sprefix=6%27%2Bpower%2Caps%2C135&sr=8-6&th=1

5. https://www.amazon.com/dp/B0CQR8P3ND

I suggest you understand wiring and controls before making this, you will be using 120VAC when you have the unit plugged. Build at your own risk. If you don't know what you are doing seek help from someone that does

I printed in ASA using 25 percent infill and gyroid infill pattern. Nozzle at 255c and bed at 105c.

This unit keeps my chamber at 50c for ABS, PA and ASA and it has worked flawless for several months now. I used magnets to secure the unit to the printer.

I used this model for the heater holder from mrgnarvar works great.