Remote NFC RFID reader - for Snapmaker U1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NFC reader magnetically attached to SnapDryer dryboxes, allowing printing while NFC tags remain functional.
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 63
- Wydruki
- 3
- Wyświetlenia
- 1642
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Snapmaker U1 NFC reader attached to SnapDryer dryboxes with magnets.
Allows printing from the dryboxes while keeping NFC tags functional.
ESP32-firmware and instructions are here:
https://gitlab.com/baze/snapmaker-u1-drybox-nfc-reader
You need to be running paxx12 firmware in your Snapmaker U1 to support remote RFID-readers.
Hardware needed per reader:
- 1x ESP32-C3
- 1x PN532 reader
- 1x USB-power wire (To power ESP with normal USB-power source)
- 1x 5mm round magnets (5mm diameter, 5mm deep)
Hardware needed per drybox:
- 2x 5mm round magnets (5mm diameter, 5mm deep)
USB-power cable cutout
Decide do you want the cable to point down, left or right and cut out that corresponding wall from the model.
Wall is 1 lines thick so should be easy with any kitchen knife.
Updates
- Update 4.5.2026 - Added version 2
- New body allows placing the ESP32 horizontally or vertically making the USB-port easier to access.
- Added cutouts for USB if you want to power it directly with USB-C -cable.
- Old version 1 left as a reference.