Ponte Del Diavolo boardgame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed version of 2007 gem "Ponte Del Diavolo"
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Recently I learned about Ponte Del Diavolo, a greatly underappreciated gem of a boardgame from 2007,
https://boardgamegeek.com/boardgame/27172/ponte-del-diavolo
Unfortunately I could not find it for sale anywhere easily, so I quickly drew up this version and printed it.
It's an easy print, with tiles satisfyingly locking into place (a feature missing from the original) but easily sliding off after a game.
This is one of those "easy to learn, hard to master" games which you can explain in 5 minutes but spend years getting good at.
The rules can be found here:
https://www.yucata.de/en/Rules/PonteDelDiavolo
To print, you need 1 board (you need a 30x30 printer for full size, but everything can scale without issue), 2x 40 tiles (once in a dark and once in a light colour) and 15x bridge.
I printed mine. in 0.2mm layers in PETG, there's no need for supports so basically any working setting should do :-)