Small box with snapping lid - standalone and wall mountable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The box has a snapping lid. There are two models available: - standalone version - wall mountable (board mount)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I started with the "standalone" version of the box as I needed something for the tooth sticks and Q-Tips. Then I had the idea for a wall mountable board to hang multiple of the boxes on it.
As you see, the board can hold up to 15 boxes.
The small pin is for the joint. You don't need glue for the stick. But you will need a drill machine with a 3mm drill bit to drill the holes after printing. At least in my case the holes were not really round and a bit to thight for the stick.
The box for the wall mount should be printed as shown in the images. That's the way I could get the best looking results.
Planned: a box which is twice or three times the width of the standard box for longer items.