1 / 6
Double NvidiaTesla P4 60mm fan Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a custom reduction for two Tesla P4 GPUs. I recreated the model with a good fit and modified it for my needs.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
I used two Noctua NF-A6x25 PWM fans with a 5.3 mm spacer and four M4x60 screws. I tested the thermals and the temperature sits at around 81 °C. This is good enough for my suitcase setup since I will never run both GPUs at maximum load, but I suggest using a single server fan, which is much louder but improves temperatures significantly.