Led Lenser P14 replacement battery cage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
More solid replacement part for the P14 flashlight by Led Lenser. Prints vertically on any prusa machine.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 1
- Wyświetlenia
- 56
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Bought second hand led lenser p14 flashlight that had a broken battery cage. The pieces were breaking appart and the screws had nothing to hold on to anymore.
Modeled this replacement part off of the original profile. Works like a charm and turned out more solid than the original. I printed it vertically on my prusa mini with PLA, 100% infill and a pretty large brim for adhesion.
You might need to clean up the brimmed end because tolerances with the contact plates are tight. You'll probably also need to drill out the holes for the screws with a 2mm - 2,5mm drillbit.