1 / 2
Hi-Lift jack rollbar mount TPU pads — zdjęcie 1
1 / 2

Hi-Lift jack rollbar mount TPU pads

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

TPU pads to go between Hi-Lift jack and rollbar mount

Ocena
0 / 5
Polubienia
4
Pobrania
12
Wydruki
0
Wyświetlenia
72
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Attribution — Noncommercial

I've had several Hi-Lift jack mounts for my Jeep TJ over the years but recently started using this mount from Amazon: https://www.amazon.com/dp/B0C3VJ5LYN?ref=fed_asin_title

This model is two pads to fit between the jack and the mount on each end. Made out of TPU, they provide a little cushion between the metal parts. I didn't get a photo of the part that goes on the base before mounting it, but it's basically just a square with a couple nubs that stick up and go through the unused holes in the jack mount to help keep it in place. 

The other piece is pictured in bright green. I decided to make a large hole to put a nut on the bolt (M10x1.5). This keeps the bolt rigid so it's easier to slide the jack onto it, plus it keeps the TPU model in place when the jack is removed. 

Tagi