1 / 4
Snap‑Fit Gehäuse für Mantelwellensperre (RG58, FT140‑43) — zdjęcie 1
1 / 4

Snap‑Fit Gehäuse für Mantelwellensperre (RG58, FT140‑43)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Druckfreundlich, zweiteilig, für Mantelwellensperre/Line‑Choke. Optimiert für RG58‑Antennenkabel auf FT140‑43 Ringkern

Ocena
0 / 5
Polubienia
1
Pobrania
7
Wydruki
0
Wyświetlenia
63
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

english version below

Beschreibung

Zweiteiliges Gehäuse für eine kompakte Mantelwellensperre (HF‑Choke) mit Amidon FT140‑43 und RG58. Bietet soliden mechanischen Schutz der Wicklung – ideal auch für mobilen Einsatz (z. B. POTA). Elektrische Wirkung ergibt sich aus Kern/Windungszahl; Details unter https://dd6yi.darc.de

Merkmale

  • Passend für FT140‑43 + RG58

  • Zwei identische Schalen, formschlüssig

  • Kabelbinder‑Verschluss; optional verschraubbar

  • Druck ohne Support

  • PETG erprobt; andere Filamente möglich

Slicer‑Hinweis

Ein Teil laden, duplizieren, das Duplikat einmal spiegeln (z. B. X‑Achse), beide Hälften flach liegend gemeinsam drucken.

Drucktipps

  • Material: PETG empfohlen; PLA/ASA/ABS möglich

  • Layerhöhe: 0,2 mm

  • Infill: 20–30 %, 3–4 Perimeter

  • Support: keiner

Zusammenbau

  1. FT140‑43 mit RG58 nach Wunsch wickeln

  2. Kern in eine Schale legen, zweite Schale aufsetzen

  3. Mit 2–4 Kabelbindern fixieren oder verschrauben

  4. Kabel nicht quetschen, nur bündig anziehen

Hinweise: Gehäuse schützt mechanisch; zusätzliche Abdichtung nur bei Bedarf (z. B. Schrumpfschlauch). Für Outdoor UV‑beständiges Material bevorzugen. Weitere technische Infos: https://dd6yi.darc.de

English Version

Description

Two-piece enclosure for a compact common-mode choke (HF choke) using an Amidon FT140‑43 core and RG58. Provides solid mechanical protection for the winding – ideal for portable use (e.g., POTA). Electrical performance depends on core/turns; details at https://dd6yi.darc.de

Features

  • Fits FT140‑43 + RG58

  • Two identical shells, interlocking design

  • Cable ties as default closure; optional screws

  • Support‑free printing

  • Proven with PETG; other filaments possible

Slicer Note

Import the part, duplicate it, mirror the duplicate once (e.g., on the X‑axis), then print both halves flat side down together.

Print Settings

  • Material: PETG recommended; PLA/ASA/ABS also possible

  • Layer height: 0.2 mm

  • Infill: 20–30%, 3–4 perimeters

  • Support: none

Assembly

  1. Wind RG58 on the FT140‑43 as desired

  2. Place the core in one shell, align cable exits, add second shell

  3. Secure with 2–4 cable ties or use screws

  4. Do not over‑tighten; close flush without squeezing the cable

Notes: Enclosure provides mechanical protection; add sealing only if needed (e.g., heat‑shrink at cable exits). For outdoor use, prefer UV‑resistant materials. More technical info: https://dd6yi.darc.de