Quarter holder for shops like Aldi
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This quarter holder is designed to handle more abuse.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 27
- Wydruki
- 1
- Wyświetlenia
- 84
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There are other perfectly good quarter holders, but I like designing my own things, so that's what I did.
Use PETG, 0.1M layer height, 100% infill.
You need plastic that is slightly flexible without creep, so no PLA and no CF filaments. The layer height is needed for the steep overhang so that you don't need supports.
This holder is designed to be under constant tension while it has a quarter in it, that way it grips the quarter better. I also made the walls nice and thick so it hopefully won't break as easily while on a keyring with 20 keys that is getting abused.