Vulture 1886 Pattern (Nerf blaster mod for MHP's Vulture)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cosmetic mod to the vulture with the looks of Winchester 1886
- Ocena
- 4,75 / 5
- Polubienia
- 420
- Pobrania
- 625
- Wydruki
- 5
- Wyświetlenia
- 10 860
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice
BOM (on top of the Vulture kit):
M3x25mm SHCS qty 7
M3x30mm SHCS qty 2
M3 Nuts qty 9
#4 Screws (3/8" Long) qty 14
5 walls and 99% gyroid for orange parts, 5 walls and 15% gyroid infill for the rest
Assembly:
This mod modifies the grip section, while the front furniture goes over the original parts. Modifications on the Upper Cover, Receiver R & L are cosmetic and can be kept as original if that's what you want
Grip uses most of the SHSC. Use M3x25mm in green locations, while M3x30mm in red locations
Red arrows use glue, with #4 screws in green locations for assembling the rare sight.
Use a 3mm bungee cord to tension the fake hammer
Use qty 7 #4 screws to assemble the front furniture. Glue on the name plates
