1 / 5
P.E.E.P.s (Probably inEdible inEsculent Plastic) Peeps Look-alike — zdjęcie 1
1 / 5

P.E.E.P.s (Probably inEdible inEsculent Plastic) Peeps Look-alike

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

1,14 € – 1,39 € netto (bez VAT)

Dla pliku: Peeps_0.15mm_PLA_MINI_1h30m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 1,27 € netto (środek widełek).

Masa podana przez autora
11 g
Czas druku podany przez autora
1,5 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

A plastic replica of those annoying marshmallow creatures that nobody wants to eat.

Ocena
4,95 / 5
Polubienia
104
Pobrania
429
Wydruki
24
Wyświetlenia
1755
Oceny
20

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Seriously, who even likes these things? Worst thing to get at Easter. I coated the print in sugar and it tasted the same, minus the chipped tooth (just kidding). This is a fun swap-prank or decoration if you please. I included a picture of one coated in sugar if you're curious. Sorry I didn't have annoying yellow chick or puke-worthy pink bunny filament to print these with.

 

These print best at .15mm or better. They require no supports or assembly. Fuzzy skin looks really cool! The models pictured were the prototypes, I've since scaled them to the exact size; though there is a great amount of variance in the real product it was modeled on, making it hard to get an exact. My calipers are sticky now. Enjoy.

 

4/17/22: Added a flatter bottom bunny if you're getting overhang issues on your slicer/printer. 

Tagi