1 / 3
Film Copy Stand - 35mm Film Holder for Scanning — zdjęcie 1
1 / 3

Film Copy Stand - 35mm Film Holder for Scanning

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Film holder for 35mm film for my Light Source Mini - 97 CRI, from Negative Supply.

Ocena
0 / 5
Polubienia
4
Pobrania
36
Wydruki
0
Wyświetlenia
423
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Film Copy Stand

I was tired of putting together random gear when I wanted to scan some negatives, a tripod here, a tracing light there, and so on... so I decided to build a dedicated copy stand.

My design is based around the excellent Light Source Mini - 97 CRI, from Negative Supply.

I already had a camera and macro lens and an unused tripod head and clamp.

So I started designing and set off to make my dream a reality. I used a piece of wood for the base, and I welded together a post using some scrap plate and a piece of square tube. Everything else is modelled in Fusion and printed in plastic.

35mm Film Holder for Scanning

This film holder is made for 35mm film. It fits snugly into the Light Source Mini - 97 CRI, from Negative Supply.

This allows me to easily slide film through and scan each frame in the perfect fixed position. Way better results and repeatable compared to my past setups

Other Models In This Project

Tagi