1 / 2
Film Copy Stand - Mount for interchangeable film holders — zdjęcie 1
1 / 2

Film Copy Stand - Mount for interchangeable film holders

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple mount to hold my film holders

Ocena
0 / 5
Polubienia
1
Pobrania
5
Wydruki
0
Wyświetlenia
114
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Film Copy Stand

I was tired of putting together random gear when I wanted to scan some negatives, a tripod here, a tracing light there, and so on... so I decided to build a dedicated copy stand.

My design is based around the excellent Light Source Mini - 97 CRI, from Negative Supply.

I already had a camera and macro lens and an unused tripod head and clamp.

So I started designing and set off to make my dream a reality. I used a piece of wood for the base, and I welded together a post using some scrap plate and a piece of square tube. Everything else is modelled in Fusion and printed in plastic.

Mount for interchangeable film holders

Since I have interchangeable film holders for this project, I figured I should store them somewhere while not in use.

So I made this simple mount that stores them securely in-place on the base plate

Other Models In This Project

Tagi