Film Copy Stand - Camera Pole Shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple shroud to cover my fancy welding on my camera pole/plate
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 192
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Film Copy Stand
I was tired of putting together random gear when I wanted to scan some negatives, a tripod here, a tracing light there, and so on... so I decided to build a dedicated copy stand.
My design is based around the excellent Light Source Mini - 97 CRI, from Negative Supply.
I already had a camera and macro lens and an unused tripod head and clamp.
So I started designing and set off to make my dream a reality. I used a piece of wood for the base, and I welded together a post using some scrap plate and a piece of square tube. Everything else is modelled in Fusion and printed in plastic.
Camera Pole Shroud
So I'm an amateur welder... i.e.: not much practice. I think my welded plate + post + gussets looks great. But you know what looks better? A fancy shroud.
This is my fancy shroud... lol