Strengthened Bolts & Shims for Flexible & Sturdy Phone Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This remix addresses strength and tolerance issues I encountered while printing and assembling the original design.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
My Bolts are MUCH stronger and use 30g less filament than the originals (mainly due to me using 12mm heads instead of 25mm ones)
The XL phone holder fits my S24 Ultra with a case perfectly. I printed the phone holder in PETG and the remaining parts in ABS, which has worked very well so far. The original clamp bolt works well since it is primarily loaded in compression.
The original arm bolts are printed in a weak orientation and can break before much clamping force is applied. In this remix the bolts are redesigned so they print flat for improved layer strength. A separate Bolt Handle is used so the finished assembly still has a fully round knob for aesthetics.
I also found the unthreaded arm joints had about 1 mm of play. While still usable, this was looser than I preferred. To reduce this I added optional 0.8 mm thick × 11 mm wide sleeves which tighten the fit between the arm sections.
I have also included a generic 3MF file with all remix & original parts plated along with the XL phone holder for convenience.
Parts Required
Print from This Remix:
2 × Long_Mount_Bolt (47 mm exposed thread)
1 × Short_Mount_Bolt (34 mm exposed thread)
3 × Bolt_Handle
3 × Bolt_Nut (optional aesthetic cover)
5 × Sleeve (optional for tighter joints)
From Original Model:
3 × CZFA_FlexFrame_Frame_25cm
1 x czfa_flexframe_basea_part1 (clamp)
1 x CZFA_FlexFrame_BaseA_part2 (clamp)
1 × CZFA_FlexFrame_Longscrew (for clamp)
1 × CZFA_FlexFrame_Screw cap-lid (for clamp)
Choose one phone mount:
1 × CZFA_FlexFrame_XL-PhoneMount
or
1 × czfa_flexframe_phonemount
Phone Mount to Arm Adapter:
1 × CZFA_FlexFrame_Mount-Mount
or Optional additional articulation:
1 x czfa_flexframe_mount-mount-additional-movement-1-2
1x czfa_flexframe_mount-mount-additional-movement-2-2