Chainsaw bar filling tool (STIHL, Husqvarna, OREGON)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Helps you to fill chainsaw bar to cut straight.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 285
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Open Community License v1
EN
Dear makers and forestry workers,
Isn't your chainsaw cutting straight? An unevenly worn guide bar could be one of the problems. This tool helps you file the guide bar of your chainsaw to be rectangular. Then you should check if your chain teeth are the same length, and after that, it should cut straight. You can easily check the length of the teeth with my sharpening gauge.
Print settings:
PETG material
4 perimeters
20% infill with 3× fill multiline, honeycomb
0.4 mm nozzle
0.2 mm layer height
Required for assembly:
1x Screw DIN 963 M5x12
1x NUT DIN DIN 562 M5
super glue for NUT CAP
4EQ focuses on accessories for forestry workers and people who use forestry/garden equipment. I design these accessories already optimized for 3D printing and try to add some extra function to them. If you like my work, I would really appreciate a like, printing it including the logo, and possibly sharing it.
If you would like something custom designed, feel free to contact me. I’ll be happy to design it and provide it under the OCL license.
CZ
Milí tiskaři, lesáci,
Něřeže vaše motorová pila rovně? Jedním z problémů může být nerovnoměrně opotřebená vodicí lišta. Tento nástroj vám pomůže srazit lištu pily do pravého úhlu. Poté byste měli zkontrolovat, zda jsou řezné zuby řetězu stejně dlouhé, a pak už by měla pila řezat rovně. Délku zubů si můžete snadno ověřit pomocí mé vodící mřížky.
Nastavení tisku:
PETG materiál
4 perimetrů
20% infill s 3× fill multiline, honeycomb
0,4 mm tryska
0,2 mm výška vrstvy
Nutné ke kompletaci:
1x ŠROUB DIN 963 M5x12
1x MATICE DIN DIN 562 M5
super glue for NUT CAP
4EQ se zaměřuje na doplňky pro lesáky a lidi, kteří používají lesní / zahradní techniku. Tyto doplňky navrhuji již optimalizované pro 3D tisk a snažím se jim přidat i nějakou funkci navíc. Pokud se Vám bude moje tvorba líbit, budu moc rád za like, vytištění včetně loga a případně i sdílení.
Kdybyste si přáli navrhnout nějakou věc, neváhejte mě kontaktovat. Rád ji navrhnu a poskytnu pod OCL licencí.