1 / 9
Anycubic Chiron SKR2 - Y Linear Rail - Dual blower+V6 — zdjęcie 1
1 / 9

Anycubic Chiron SKR2 - Y Linear Rail - Dual blower+V6

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Major update on the Chiron: SKR2, TFT70, linear rails on Y axis, Phaetus Dragon, etc.

Ocena
0 / 5
Polubienia
14
Pobrania
133
Wydruki
0
Wyświetlenia
2276
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

NOTE:

/!\ Installing the new housing on the print head is painful /!\
You'll need to make a splitter or solder on the Fan0 of the PCB.

  • EDIT 2023-04-23 : Add an other vent for TMC drivers
  • EDIT 2022-09-05 : Adding a zip files with SD card files ready to go. This is set up for the default probe but BLTouch is done too (just commented)
  • EDIT 2022-04-04 : update the V6 adapter to let some space for the locking collar

 

 

I strongly recommend to remove everything from the X carriage (heatsink, probe L shape support, endstop) then install and plug everything in new housing FIRST and THEN screw on the X carriage, starting from the end stop, then the heatsink and finish with the blowers on the side.
You'll have to lower the end stop bumpscrew (a simple nut do the trick)

This is all the parts I used to upgrade my Anycubic Chiron with:

Videos (Will be update when I'll post other parts):

  • Part 1:
  • Part 2: 

Link to parts I used from other creators (remixed or same parts):

Tagi