Turbo Dillon Case Feeder Plate v. 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case Feeder Plate for the 9mm Dillon Turbo version. It replaces the original one without modifying anything. I…
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 45
- Wydruki
- 1
- Wyświetlenia
- 319
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Case Feeder Plate for the 9mm Dillon Turbo version. It replaces the original one without modifying anything. I designed it to optimize case collection speed.
- There's no need to modify anything on the Dillon case feeder. Simply unscrew the clutch on the original platter and screw it onto this optimized one.
To print it you need a 300x300 printer, I printed it in Pla+ at 60% with 5 walls.
-Update V.2 In the V2 I improved the case seal in its travel, where it would slide off due to vibrations, and redesigned the case unloader. In this version, replace the Dillon plate with this one.
-- Update Version 1.1 - I increased the thickness of the central part to make the plate higher and the shells fit better, for those who printed version 1.0 I attach the ring to put underneath as a thickness
Print Settings
Printer Brand:
Creality
Printer:
K1
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.20
Infill:
60
Category: Other