1 / 1
FAG/Campagnolo/SKF Bottom Bracket Tool (Tretlager-Werkzeug)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bottom bracket tool with strengthened hex boss
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
A tool for removing old FAG/Campagnolo/SKF bottom brackets. I haven't tested whether the hex boss actually works, if it doesn't a pipe wrench does the trick (see photo).
I recommend printing this with at least 5 walls. Not sure what the best material is, I used PETG and that worked. Slow and hot will make it stronger too.