1 / 7
TFL Drop Top fender to Fungineers X10+Stompies Lowers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An extended lower designed to allow a TFL drop top fender (XR(C)/GT) to fit on an X10 rail system with Stompie footpads.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 365
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Updated CAD below.
An extended lower designed to allow a TFL drop top fender (XR(C)/GT) to fit on an X10 rail system with Stompie footpads.
Use countersunk 4x M5x14mm and 4x countersunk M5x18mm for securing to the X10 rails. 18mm for the inner bolts towards the wheel well and 14mm for the bolts that go through the Stompie.
A strong filament with good layer adhesion is recommended with solid walls for the fender section to minimize delamination when securing the drop top.