1 / 13
1/3rd Scale Federal Signal Model 5 — zdjęcie 1
1 / 13

1/3rd Scale Federal Signal Model 5

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

1/3 scale functional Federal Signal Model 5!

Ocena
0 / 5
Polubienia
13
Pobrania
44
Wydruki
0
Wyświetlenia
443
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a ⅓ scale, fully functional Federal Signal Model 5.

NOTE: THIS MODEL IS STRICTLY FOR 3D PRINTING. DO NOT PUT THIS MODEL IN ANY VIDEO GAMES LIKE ROBLOX!

The siren is held together with M3 and M4 screws. The eyebolts are just standard M4 eyebolts

Minimum print bed size 220x220x250 (stock ender 3 printer)

USE SUPER GLUE ON THE WEIGHTS! If you do not you are at risk of them FLYING OUT which can cause injury if not careful! Repeating, USE SUPER GLUE! I personally used Gorilla Glue Gel.

It uses a Samsung microwave motor. Refer to this chart that Demetrius P. made to find a good motor:
https://docs.google.com/spreadsheets/d/e/2PACX-1vSRgCt2vBb0Ux1rgWShkMjw1oQMT-HM3kNxAkeEDHh_7EaW8s02GlAKvf9ozqNN0glXJizjP6SmUYCT/pubhtml

Use supports on the stator, louver, and hat. Everything else does not need supports.



Weights (12 needed): 
https://www.amazon.com/dp/B0C8J47VJF?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Cable used:
https://www.amazon.com/dp/B0BSBSKQTM?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Capacitor (8uf)
https://www.amazon.com/dp/B0143VJN40?ref=ppx_yo2ov_dt_b_fed_asin_title

Tagi