Fuji grappling mat spacers (BJJ, jiu-jitsu, wrestling, judo)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacers to allow you to distribute the gaps between grappling mats across a floor to reduce big gaps
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution
Description
The gym I go to has a large spring floor with 2" Fuji mats. It's amazing. They're great. But ...
The mats shift around a little bit with use, and when you have a large floor any small sizing problem eventually results in gaps settling in that are larger than I was comfortable with. These mat spacers allow you to create smaller gaps across a floor to eliminate the larger gaps. This is clearly a common problem if even BJJ Fanatics can't eliminate the gaps on a smaller floor.
Installation should be straight forward. Pull up the mat enough to allow you to put the bottoms under a mat with the wedge between them. Put the mat back down. One spacer in the middle of the mat has worked for me.
Printing
I printed all of these with TPU, because they need to give if people are coming down right on them. 15% infill seems pretty good.
Files
I've included files to make it easy for you just to print most configurations, but I've also included Fusion and step files if you want to configure them. If there are specific sizes you think you need and CAD is too intimidating just leave a comment and I'll try to add it for you.
Types
There are two variants:
Mat_spacer: This has two flanges and is designed to go between two mats.
Mat_spacer_wall: One side cut off so that you can place it flush with a wall and push the mats from the edge.
Dimensions
The design is parametric, so you can change the dimensions if you're feeling frisky.
Heights
There are two heights that are intended to sit below the top of the mat.
35 mm: Good for the 2" mats
20 mm: Should be good for 1" and 1.5" mats
Width
The thickness of the spacer portion.
4 mm: Pretty narrow. Works best if you have a small to medium gap with a lot of mats you can split the gap over
6.5 mm: Hard to believe, but this is a little thicker for larger gaps or fewer mats available to distribute over.
9 mm: I feel like the 9mm ones create a gap larger than I like. But sometimes you just don't have the mat configuration that allows you to split a large gap into the smaller dimensions. I'd rather have 2 9mm gaps than one 18mm gap.
Length
100 mm: All but one of them are this long. It seems to work out fine for me.
200 mm: One of the wall variants is this long just to provide a bit more material to try to keep the mats square.