Customizable Pillar Set for Märklin H0 C-Track
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
12 pillar set for Märklin H0 C track up to 78mm (about 3 inches)
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
12 pillar set for Märklin H0 C track up to 78mm (about 3 inches).
78mm should be enough for a second crossing below. Please check it before, especially for trains with current collectors.
UPDATE V2: now customizable. Now each pillar is numbered and labeled so it is easy to distinguish them.
Please note the pillars are angled on the track bed for a better stand. Put one pillar in between each track segment. Be sure you assemble them correct and it has a stable stand.
This model is a derivative work based on "Customizable Pillar Set for Märklin H0 C-Track" by wstein, originally posted on Thingiverse.
Original Model Link: https://www.thingiverse.com/thing:636175
License: This model is released under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license, the same as the original work.
Photo Attribution:Photos used in this listing are by wstein and are used under the terms of the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license.