UniFi Camera turret & bullet Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This elevated camera mount works as a junction box for UniFi cameras and providing space to protect cable.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 166
- Wydruki
- 0
- Wyświetlenia
- 963
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UniFi Camera Mount G5/G6 with Hidden Cable Space (Junction Box for UniFi G5 / G6)
This elevated camera mount works as a junction box for turret cameras (+ bullet adapter) and provides additional space to hide and protect cable connectors behind the camera.
It is designed for a clean and professional installation of UniFi turret cameras, especially G5 and G6 models. The mount allows connectors to be safely stored inside the housing while keeping the camera installation neat and organized.
We have also newly added an adapter for G5/G6 Bullet, Pro Bullet, and AI DSLR camera models in two variants – indoor and outdoor.
The outdoor version supports the use of TPU/TPE sealing rings and plugs.
The set contains 6 different variants for various installation scenarios + 2 models for the bullet adapter.
Available Variants
The set includes different combinations depending on the installation type:
Indoor version
Outdoor version
Side cable entry with 16 mm diameter compatible with PG9 or M16 cable glands
Rear cable entry with 20 mm diameter
Two outdoor design variants
Variant Details
Indoor V1
This version has a narrower diameter because additional connector protection is usually not required for indoor installations.
Outdoor V1 / Outdoor V2
The difference between these versions is purely visual (design).
Both variants have identical functionality and dimensions.
Matching sealing plugs are included to close unused openings and help prevent water ingress during outdoor use.
Bullet Adapter
Indoor version
Without support for a sealing ring.
Outdoor version
Supports the use of a sealing ring and sealing plug.
Included models:
Sealing ring
Sealing plug
Required Hardware
To complete the assembly you will need:
M3 threaded inserts
M3x10 screws
Printing Recommendations
Recommended materials:
PETG or PCTG – suitable for indoor use
ASA or other UV-resistant materials – recommended for outdoor use
For sealing plugs and rings, we recommend using TPU/TPE for improved flexibility and sealing performance.
Print settings used:
Layer height: 0.16 mm
Supports: not required (depending on printer and print orientation)
Scarf seam setting: Override filament scarf seam setting
Scarf seam type: Contour