Laptop stand bracket for 1/2 inch wooden dowels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple bracket designed to turn a few lengths of 1/2" wooden dowels into a laptop stand.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Open Community License v1
Printing
I printed with 4 walls in PETG and it seems plenty strong for the static load of a medium laptop.
There is just the one piece with the dowel holes chamfered on one side for assembly. You must clone and mirror the piece for the other side.
Assembly
Cut your dowel into three equal lengths. I used 12 inches which seems wide enough to be comfortable for most laptops. Then simply insert the dowels into the holes of one piece before putting the other piece onto the dowels. I was able to complete assembly by lightly hammering the second piece with my hand.
