AMS HT Holder (X/P Series) V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You thought I'd stop at three, well think again, cuz now it's FIVE!
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is Version 2 of my Triple AMS HT Holder (X/P Series)! It's been upgraded with better connection mounts and allows the edition of 2 more HT units. It works the same as the original model, but with a few upgrades as already mentioned. The P2S is compatible with this newer version along with the older version too as recently tested. Much outlet/power space will need to be for these units to dry however because of the immense power draw these things require.
*NOTE*
Still recommend using PETG, ABS, or something stronger as mentioned in first model
Some sanding may be required
Some adhesive foam may need to be used on the side holders to ensure it doesn't damage the printer
P2S works with both V1 and V2 models
LOTS of power outlet space is required