Strengthened Wall Connection/Anchor Pieces for Honeycomb Wall Storages + Duo / Quad Versions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In this version, the screw anchoring to the wall completely squeezes the part against the wall with no breaking point.
- Ocena
- 4 / 5
- Polubienia
- 208
- Pobrania
- 435
- Wydruki
- 3
- Wyświetlenia
- 3884
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
The original wall anchor piece only lets the screw to hold/squeeze the bottom half of the part wall anchor printed part against the wall which means it's if you pull on the base plates, it can break there, leavinf the top half on top of the base plate and the bottom half stuck to the wall the the screw still in.
In this edited version, The screw chamfer starts right from the rop and lets the screw pull the part hard againstt the base plate, applying the pressure at the top of the base plate.
Edited using tinkercad.
I feel I could have worded this better, I hope it makes sense :).
If you want to tip me a coffee, much appreciated :) - https://ko-fi.com/3dzoidberg