Modular Hexagon Storage System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular print in place hexagon storage system with 4 drawer layouts
- Ocena
- 5 / 5
- Polubienia
- 627
- Pobrania
- 1206
- Wydruki
- 3
- Wyświetlenia
- 5879
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
A fun modular hexagon themed storage system. It comes in two parts, the stackable containers that slide together, and the drawers that slide in them. Useful for storing small hardware, electronic parts, and the like.
Fits together with any number of drawers, along with a smaller sized drawer.
Printing Instructions
Print the container with the hexagon size down. It will print easily in 1 piece. You can you a larger layer height to print faster with little quality loss.
The drawers can be printed in place right-side-up with no supports. a .2mm layer height should be fine, but if you have the time, then a .15mm layer height or smaller will look the best.
For both models PLA or PETG both work great, and infill doesn't really matter. You can easily print multiple at once too, I've found that you can fit 3 of the outer containers on a single Core One build plate.